Products
Nitrogen Generator Huddersfield: On-Site Supply for Industry
A nitrogen system has to deliver the required purity, pressure and flow throughout the production cycle. An undersized generator restricts the process. An oversized system ties up capital and compressed-air capacity without improving the result.
Search Air, Atlas Copco Premier Distributor, specifies, installs and maintains nitrogen generators in Huddersfield and the surrounding industrial areas. We have been an Atlas Copco Premier Distributor since 2002.
A Nitrogen Supply Sized Around Your Process
We start with the process rather than a generator model. Our compressed-air assessment establishes what the equipment must deliver and whether the existing air system can support it.
The assessment covers:
- Required nitrogen purity or residual-oxygen limit
- Normal flow, peak demand and operating hours
- Delivery pressure at the point of use
- Existing compressor capacity and air treatment
- Available installation space and connection requirements
- Maintenance access and future demand changes
We then specify suitable nitrogen and oxygen generators, air treatment and controls as one working system. Installation and commissioning are planned around the agreed production requirements.
Reliable Nitrogen and Oxygen supply
Stop relying on third party suppliers, make your own, 24/7 availability of gas.
Cost Effective
Creating your own gas on site ensures no costly processing, refill and deliveries.
Plug-and-play
Atlas Copco generators come ready to use, all that is needed is a dry, clean supply of compressed air.
-
Reliable Nitrogen and Oxygen supply
-
Cost Effective
-
Plug-and-play
PSA or Membrane Generation?
The measured process requirement determines the technology. Membrane generation is generally considered for moderate-purity duties. Pressure swing adsorption, or PSA, is considered when the process requires higher purity or tighter control of residual oxygen.
Atlas Copco explains that PSA generators use alternating vessels filled with carbon molecular sieve. Membrane generators separate gases as compressed air passes through hollow fibres. Both technologies depend on a suitable supply of clean, dry compressed air.
An on-site generator is not automatically the right choice for every facility. Very low or intermittent consumption still needs comparing with the site’s current supply arrangement. The recommendation can change once actual demand is measured.
From Assessment to Commissioning
Once the duty is confirmed, we specify the generator, receiver capacity, filtration, dryer requirements and compressed-air supply. Our engineers then install and commission the equipment before checking its output against the agreed operating requirement.
We also provide ongoing service and maintenance. This keeps filters, valves, air treatment and generator components working within the intended duty. For a broader view of the operational case, see the benefits of on-site nitrogen generation.
Search Air has worked as an Atlas Copco Premier Distributor since 2002. Our factory-trained engineers use genuine Atlas Copco parts, and Search Air became an Employee Ownership Trust in 2024.
Safe Nitrogen Use Starts With the Site Risk Assessment
Nitrogen is colourless and odourless. A leak may not be apparent to anyone entering the affected area.
The Health and Safety Executive warns that nitrogen can displace oxygen and create an asphyxiation hazard. Ventilation, monitoring and any further controls must follow the site risk assessment, including where nitrogen could escape and where it could accumulate. Generator location and discharge arrangements need to reflect those findings.
Huddersfield Support for the Complete Air System
Kirklees Council identifies a local manufacturing base spanning textiles and advanced precision engineering, including gears, bearings, valves, pumps, motors and turbo equipment. That variety does not justify a standard nitrogen specification. Each process still needs its own flow, purity and pressure assessment.
Our wider air compressor services in Huddersfield cover the compressed-air supply behind the generator, including air treatment, installation, servicing and maintenance. A generator cannot provide stable output if its feed air is wet, contaminated or short of capacity.
Request a Nitrogen Generator Assessment in Huddersfield
To prepare a useful recommendation, send us your required nitrogen purity, delivery pressure, normal and peak flow, operating hours and current gas supply arrangement. Details of the existing compressor, dryer and filtration also help us assess whether they can support the proposed duty.
We will define the appropriate system scope and provide clear, agreed pricing. Any work outside that agreed scope will be identified and quoted separately. Contact Search Air to arrange an assessment for your Huddersfield site and discuss the nitrogen generator specification with our engineers.
Do you want to create your own nitrogen?
Contact us